SAlu-Komplexfett K2P-20
(Alu-Complex Grease K2P-20)

DESCRIPTION Liqui Moly Alu-Complex Grease K2P-20 is a high-quality soap complex grease for lubricating plain and roller bearings at increased temperatures, average load and low speeds. Used predominantly on lubrication points which are subjected to high levels of radiant heat such as soaking pit furnaces or tar mixing plants.-

Temperature range -20 °C to +160 °C
Short-term peak temperatures are permitted up to + 200 °C.
Continuous lubrication is recommended for temperatures above +160 °C.

Corresponds to and fulfills the following classifications and specifications:

Labeling according to DIN 51502 K2P-20

TECHNICAL
DATA Appearance and consistency Natural color, soft and pliable

Saponification type Al complex

Base oil
Viscosity at 40 °C DIN 51562 mm2/s 300
Flash point DIN ISO 2592 °C 260
Pour point DIN ISO 3016 °C -22

Dropping point DIN ISO 2176 °C 255

Consistency grade DIN 51818 2

Worked penetration DIN ISO 2137 0.1 mm 265-295

Stability to liquifying DIN ISO 2137
Difference after 5,000 and 60 DH 0.1 mm < 20
Difference after 100,000 and 60 DH 0.1 mm < 40

Behavior in the presence of
water DIN 51807 Part 1 1 - 90

Corrosion protection properties
EMCOR method DIN 51802 Corr. char. 0
Copper strip test DIN 51811 Corr. char. 1 -125

Solid foreign particles
Test screen mesh 140 μ DIN 51813 mg/kg < 4

Water content DIN ISO 3733 g/100 g < 0.1

Oil separation after 7 days
and +40 °C DIN 51803 g/100 g 3.5

Ash, oxide DIN EN 7 g/100 g 1.0
Ash, sulfate DIN 51803 g/100 g 1.5

Mechanical dynamic
Test B at +140 °C DIN 51806 passed and exceeded

Resistance to oxidation
Pressure drop after 100 h at
+99 °C DIN 51808 bar < 0.5

AVAILABLE
PACK SIZE Alu-Complex Grease K2P-20 25 kg Part no. 4188
180 kg Part no. 4188